Display Range · JPM

Vehicle Monitors That Stay Readable in Daylight and Survive 40V

The monitor is where camera quality is either delivered or wasted. Our JPM range runs AHD panels with high brightness, wide input voltage and brackets that actually fit a truck dashboard.

8Models in this range
AHDShared video platform
OEM/ODMCustom builds available

The most common complaint we hear about competitor monitors is a black screen on a 24V vehicle. Most generic 7-inch monitors are rated to 30V and fail the moment the alternator surges. Our mirror and truck monitors are built to work up to 40V, with reverse-polarity protection and transient suppression for the electrical noise a commercial vehicle generates.

Beyond voltage, three things decide whether a monitor works in service: brightness (candela per square metre, not a marketing number), the mounting system, and whether the housing can take a knock. We publish brightness on the models where it matters and supply brackets designed for the specific vehicle rather than a universal ball joint.

Vehicle Monitors at a glance

Size
7 inch
Voltage
Up to 40V operation
Views
Single or quad view
Mounting
More than three bracket types available
Use
Vans, light trucks, retrofit kits
See all 8 models
Model range

Vehicle Monitors — models and specifications

Specifications below are taken from the factory parameter sheets and user manuals.

JPM-71B — 7" Mirror Monitor
JPM-71B Up to 40V

7" Mirror Monitor

Replaces the original interior mirror. Works on vehicles where generic monitors black out.

Size
7 inch
Voltage
Up to 40V operation
Views
Single or quad view
Mounting
More than three bracket types available
Use
Vans, light trucks, retrofit kits
JPM-07E — 7" Private-Mould Monitor
JPM-07E

7" Private-Mould Monitor

Our own tooling, so channels and functions can be adapted to your programme.

Size
7 inch
Inputs
3-channel video input
Versions
1-channel, split view, quad view
Orientation
Horizontal and vertical installation
AI version
Available in horizontal orientation
JPM-706 / JPM-706S / JPM-706Q — 7" AHD Monitor Family
JPM-706 / JPM-706S / JPM-706Q

7" AHD Monitor Family

One body, three channel counts — 1, 2 or 4 inputs — for standardising across a fleet.

Size
7 inch
Inputs
JPM-706: 1ch · JPM-706S: 2ch · JPM-706Q: 4ch
Signal
CVBS and AHD
Voltage
DC 12–24V
JPM-1016 — 10.1" AHD Monitor
JPM-1016

10.1" AHD Monitor

Large-format display for multi-camera trucks where the driver needs several views at once.

Size
10.1 inch
Inputs
1-channel base, multi-channel variants
Signal
AHD
Related
JPM-1016AI: 10.1" AI BSD 4-channel all-in-one with 2TB storage
JPM-1006Q

10" Quad-View Monitor

Four simultaneous views for tippers, mixers and crane trucks.

Size
10 inch
Inputs
4-channel AHD
Layout
Quad view
JPM-1010W

10" Waterproof Monitor

Sealed housing for open-cab forklifts, cranes and agricultural machinery.

Size
10 inch
Protection
Waterproof housing
Use
Open cab, exposed mounting
JPM-1203 — 12.3" Digital Rear-View Mirror
JPM-1203

12.3" Digital Rear-View Mirror

Full-width digital mirror with an AHD feed — the modern replacement for a mirror-and-monitor pair.

Size
12.3 inch
Type
Digital rear-view mirror
Signal
AHD
Use
Vans, buses, trucks with obstructed rear view
JPM-506 / JPM-09C — 5" and 9" Compact Monitors
JPM-506 / JPM-09C

5" and 9" Compact Monitors

Small AHD displays for tight dashboards and secondary viewing positions.

Sizes
5 inch, 9 inch
Inputs
1-channel CVBS / AHD
Voltage
DC 12–24V
At a glance

Range comparison

ModelSizeInputsSignalHighlights
JPM-71B7"1 / 4AHD, CVBSMirror type, up to 40V
JPM-07E7"3AHDPrivate mould, AI version, vertical mount
JPM-706 / 706S / 706Q7"1 / 2 / 4AHD, CVBSSingle platform family
JPM-07D7"1AHDCompact body
JPM-101610.1"1 / multiAHDLarge format, AI all-in-one variant
JPM-1006Q10"4AHDQuad view
JPM-1010W10"1 / multiAHDWaterproof
JPM-120312.3"1 / multiAHDDigital rear-view mirror
JPM-5065"1AHD, CVBSCompact
JPM-09C9"1AHDCompact, BOE panel option

What to check before you specify a monitor

  • Input voltage range. If the vehicle is 24V, confirm the monitor is rated above 30V. This single spec causes more warranty claims than any other.
  • Brightness. For a cab in direct sun, look for 500 cd/m² or higher. Mirror monitors are read at close range so they tolerate less, but they must still have a genuinely anti-glare surface.
  • Channel count. Decide now whether the driver needs one view, two views or four. Buying a 4-channel monitor and running one camera wastes money; buying a single-channel unit and adding cameras later wastes more.
  • Mounting. Check the bracket against the actual dashboard before you commit. We supply several bracket types for the mirror range because no single bracket fits every cab.
  • NVH. A monitor that rattles at idle will be switched off by the driver. Damped brackets matter more than most buyers expect.
If you are building an OEM programme, the JPM-07E and JPM-1203 are our own tooling, which means channels, connectors, graphics and firmware behaviour can be modified to your specification.
FAQ

Frequently asked questions

Will an AHD monitor accept my existing CVBS cameras?

Most of our monitors accept both CVBS and AHD, which is what makes them suitable for staged retrofits — keep the existing cameras today, replace them with AHD later. Confirm the specific model with us if you are mixing brands.

Why does my monitor show a blue screen when the engine starts?

That is a voltage dip during cranking dropping the monitor below its minimum. Two fixes: use a monitor with a wider input range (40V-rated models such as the JPM-71B), or add an ignition-delay module so the monitor powers up after the engine is running.

Need help specifying vehicle monitors?

Tell us the vehicle, the application and the destination market. We will propose a configuration and quote within 24 hours.

Email Us for a Quote
Emailinfo@jfacam.com
WhatsApp+86 188 7400 7838
Tel+86-0755-2819 2146