Camera Series · JPC
CAB-20

CAB-20 20m foam cable (female to male, 4-pin aviation)

  • 20m foam video cable with a 4-pin aviation connector, female to male
  • Pure-copper connector with 30 x 0.1 mm copper video shield and aluminium-foil shielding
  • 3 fibre strands inside and an OD 5.5 mm professional jacket
  • The CAB-01 to CAB-20 range shares the same construction; the ordered length is the difference

Send the vehicle type, quantity and market — we reply with a configuration and price within 24 hours.

CAB-20 selling points

CAB-20: the verified details behind the product page

These cards pair approved product images and exact-model source-folder evidence with selling points from the current model sheet. Ordering choices and limits remain visible below.

Approved main product view of the CAB-20
01. Product identity

20m foam video cable with a 4-pin aviation connector, female to male

Approved additional product view 2 of the CAB-20
02. Additional product view

Pure-copper connector with 30 x 0.1 mm copper video shield and aluminium-foil shielding

Approved additional product view 3 of the CAB-20
03. Additional product view

Suitable for tractor-to-trailer camera and power runs

CAB-20 product features

  • 20m foam video cable with a 4-pin aviation connector, female to male
  • Pure-copper connector with 30 x 0.1 mm copper video shield and aluminium-foil shielding
  • 3 fibre strands inside and an OD 5.5 mm professional jacket
  • The CAB-01 to CAB-20 range shares the same construction; the ordered length is the difference
  • Suitable for tractor-to-trailer camera and power runs

Ordering notes

Points to confirm before production so the unit arrives ready to fit.

  • Confirm the requested length before ordering
  • The standard cable is female to male; specify another combination if needed
  • Confirm the pin-out before production
  • Confirm whether a waterproof boot or corrugated sleeve is required
  • Confirm quantity, packaging and printing requirements

Installation & usage

Voltage, wiring, sealing and maintenance guidance for the installer.

  • Secure the cable so it cannot be pulled or chafed through
  • Keep it clear of hot engine and exhaust surfaces
  • Tighten the connector and fit the waterproof boot after wiring
  • Avoid sharp bends or stretching the cable beyond its intended length
  • Check the connector pins periodically for oxidation or water ingress

Need a quotation for the CAB-20?

Send us the quantity, the vehicle or application, and the destination market. We will confirm the specification and quote within 24 hours.