Camera Series · JPC
CAB-02

CAB-02 2m foam cable (female to male, 4-pin aviation)

  • 2m foam video cable with a 4-pin aviation connector, female to male
  • Pure-copper connector with 30 x 0.1 mm copper video shield and aluminium-foil shielding
  • 3 fibre strands inside and an OD 5.5 mm professional jacket
  • The CAB-01 to CAB-20 range shares the same construction; the ordered length is the difference

Send the vehicle type, quantity and market — we reply with a configuration and price within 24 hours.

CAB-02 selling points

CAB-02: the verified details behind the product page

These cards pair the approved product images with selling points taken from the current model sheet. Ordering choices and limits remain visible below.

Approved product view 1 of the CAB-02
Product identity

2m foam video cable with a 4-pin aviation connector, female to male

Approved product view 2 of the CAB-02
Construction and protection

Pure-copper connector with 30 x 0.1 mm copper video shield and aluminium-foil shielding

Approved product view 3 of the CAB-02
Installation and interface

Suitable for tractor-to-trailer camera and power runs

CAB-02 product features

  • 2m foam video cable with a 4-pin aviation connector, female to male
  • Pure-copper connector with 30 x 0.1 mm copper video shield and aluminium-foil shielding
  • 3 fibre strands inside and an OD 5.5 mm professional jacket
  • The CAB-01 to CAB-20 range shares the same construction; the ordered length is the difference
  • Suitable for tractor-to-trailer camera and power runs

Ordering notes

Points to confirm before production so the unit arrives ready to fit.

  • Confirm the requested length before ordering
  • The standard cable is female to male; specify another combination if needed
  • Confirm the pin-out before production
  • Confirm whether a waterproof boot or corrugated sleeve is required
  • Confirm quantity, packaging and printing requirements

Installation & usage

Voltage, wiring, sealing and maintenance guidance for the installer.

  • Secure the cable so it cannot be pulled or chafed through
  • Keep it clear of hot engine and exhaust surfaces
  • Tighten the connector and fit the waterproof boot after wiring
  • Avoid leaving the coil at full stretch or making sharp right-angle bends
  • Check the connector pins periodically for oxidation or water ingress

Need a quotation for the CAB-02?

Send us the quantity, the vehicle or application, and the destination market. We will confirm the specification and quote within 24 hours.