Aftermarket · Vehicle-specific
95790-2S011

95790-2S011 Hyundai ix35 factory rear view camera (2009-2015)

Key features

  • [It can be used if the OE is matched] OE: 95790-2S011 (similar to 95790-2S012) | Model: Hyundai ix35 (marked on our OEM cross-reference 2011-2013; 2S012 marked 2009-2015) | Position: Rear view reversing camera. If the OE number is consistent, it can be directly replaced. Before placing an order, please provide the factory harness camera photo for verification
  • Hyundai ix35 factory rear view camera, OE 95790-2S011 / 95790-2S012
  • Covering ix35 2009-2015 models
  • Factory plug connection, no wire cutting
  • The appearance is matches the factory part, and the installation position and angle are the same
  • Sealed housing, rainproof, resists mud and pressure washing

Ordering notes

Points to confirm before production so the unit arrives ready to fit.

  • Confirm the model caliber first: our OEM cross-reference indicates that the part number corresponds to Hyundai IX35. The folder in this catalog says "Elantra 1.8L / ix35 GLS". Elantra needs to be reviewed
  • Ask the customer for photos of the factory camera — front, back, plug, bracket and the OE label on the housing — and check them against ours one by one.
  • Check the OE number 95790-2S011 / 95790-2S012. The model year ranges of the two are different. Select according to the actual model year of the customer
  • Confirm the camera position — reversing view, or which channel of the 360 system.
  • Confirm quantity, packaging and printing.

Installation & usage

Voltage, wiring, sealing and maintenance guidance for the installer.

  • Disconnect the battery negative terminal before installation and keep the circuit unpowered while working.
  • When removing original parts, protect the clips, seals and plugs — do not force them.
  • After fitting, check the clips are fully seated and the seal is compressed so water cannot seep in.
  • Power up and check the reversing image and the factory guide lines work correctly.
  • When washing, do not hold a pressure washer directly on the camera or connector.
  • Keep the original parts you removed.
OEM Replacement Cameras

Other models in this range

See all 31 products in this range

Need a quotation for the 95790-2S011?

Send us the quantity, the vehicle or application, and the destination market. We will confirm the specification and quote within 24 hours.

Email Us for a Quote
Emailinfo@jfacam.com
WhatsApp+86 188 7400 7838
Tel+86-0755-2819 2146