Aftermarket · Vehicle-specific
EL-3776900

EL-3776900 BYD factory driving recorder camera (including wires/common to multiple models)

Key features

  • [It can be used as soon as the OE is matched] OE: EL-3776900 (same family: HCHQ-3776940, ST-3776900C, EQEB-3776900) | Model: BYD Seal, Atto 3, Dolphin, etc. (21/22/23) | Position: Driving recorder camera, wires included with the goods. If the OE number is consistent, it can be directly replaced. Before placing an order, please provide the factory harness camera photo for verification
  • BYD factory driving recorder camera, OE number EL-3776900, direct replacement of the original position
  • Cables are included with the goods and can be installed immediately upon arrival
  • Compatible models (see the fit car.txt list in the catalog): ATTO 3, Dolphin, Seal, Tang EV/DMi, Song Pro DM-i/DM, Song PLUS DM-i/EV, Song MAX DMi, Destroyer 05 destroyer, Han DM/EV/DM-i, Qin PLUS EV/DM-i, BYD King, Han EV Champion Edition, Tang DMi Champion Edition, Tang DM-P / DM-i etc
  • The factory harness plug is connected, no wire cutting, the appearance is matches the factory part
  • Sealed shell + waterproof rubber ring, rainproof, mudproof and pressure washer

Ordering notes

Points to confirm before production so the unit arrives ready to fit.

  • Ask the customer for photos of the factory camera — front, back, plug, bracket and the OE label on the housing — and check them against ours one by one.
  • Check the OE number EL-3776900 and the same part number (HCHQ-3776940, ST-3776900C, EQEB-3776900)
  • Confirm the specific model and year (different models/part numbers of the same car series may be different, be sure to check the fit car.txt list)
  • Confirm camera location (driving recorder/rear view/360 road)
  • Confirm whether the wire length is sufficient; confirm the quantity, packaging and silk screen printing

Installation & usage

Voltage, wiring, sealing and maintenance guidance for the installer.

  • Disconnect the battery negative terminal before installation and keep the circuit unpowered while working.
  • When removing original parts, protect the clips, seals and plugs — do not force them.
  • After fitting, check the clips are fully seated and the seal is compressed so water cannot seep in.
  • Power on and test whether the screen, video and factory-related functions are normal
  • When washing, do not hold a pressure washer directly on the camera or connector.
  • Keep the original disassembled vehicle parts to facilitate subsequent restoration
OEM Replacement Cameras

Other models in this range

See all 31 products in this range

Need a quotation for the EL-3776900?

Send us the quantity, the vehicle or application, and the destination market. We will confirm the specification and quote within 24 hours.

Email Us for a Quote
Emailinfo@jfacam.com
WhatsApp+86 188 7400 7838
Tel+86-0755-2819 2146