Aftermarket · Vehicle-specific
EJ5Z19G490A

EJ5Z19G490A Ford Escape factory rear view camera (2013-2017)

Key features

  • [It can be used if the OE is matched] OE: EJ5Z19G490A (same as EJ5Z-19G490-A) | Model: Ford Escape (the OE cross-reference list line is written as Maverick 2015-2017, the folder in this catalog is written as Escape 2013-2017, click OE to review before placing an order) | Location: Rearview reversing camera. Please provide the customer with factory camera photos for verification again
  • Ford factory rear view camera, OE EJ5Z19G490A / EJ5Z-19G490-A
  • Common specifications for US series: 1/4" CMOS active pixel array, Nidec (Japan) glass + plastic lens
  • Minimum illumination 0.1Lux, effective pixels 728×582, 600 TV lines
  • Viewing angle 170°, standard NTSC / PAL, electronic shutter 1/50~1/100,000 seconds
  • Waterproof to IP68, power supply DC 6~12V
  • The factory harness plug is connected, no wire cutting, the appearance is matches the factory part

Ordering notes

Points to confirm before production so the unit arrives ready to fit.

  • This folder has the same part number as "EJ5Z-19G490-A". It is recommended to merge them into one product file to avoid repeated quotations
  • Confirm the model size first: The company’s OE cross-reference list lists the part number as Maverick 2015-2017, and the folder in this catalog writes Escape 2013-2017. It must be reviewed according to the OE number
  • Ask the customer for photos of the factory camera — front, back, plug, bracket and the OE label on the housing — and check them against ours one by one.
  • Check that the OE number EJ5Z19G490A is exactly the same
  • Confirm quantity, packaging and printing.

Installation & usage

Voltage, wiring, sealing and maintenance guidance for the installer.

  • Disconnect the battery negative terminal before installation and keep the circuit unpowered while working.
  • When removing original parts, protect the clips, seals and plugs — do not force them.
  • After fitting, check the clips are fully seated and the seal is compressed so water cannot seep in.
  • Power up and check the reversing image and the factory guide lines work correctly.
  • When washing, do not hold a pressure washer directly on the camera or connector.
  • Keep the original parts you removed.
OEM Replacement Cameras

Other models in this range

See all 31 products in this range

Need a quotation for the EJ5Z19G490A?

Send us the quantity, the vehicle or application, and the destination market. We will confirm the specification and quote within 24 hours.

Email Us for a Quote
Emailinfo@jfacam.com
WhatsApp+86 188 7400 7838
Tel+86-0755-2819 2146