Aftermarket · Vehicle-specific
BT4Z-19G490

BT4Z-19G490 Ford Edge / Lincoln MKX factory rearview camera (2011-2013)

Key features

  • [It can be used when matching OE] OE: BT4Z-19G490-A / BT4Z-19G490-B | Model: Ford Edge 2011-2013, Lincoln MKX 2011-2013 | Location: Rear view reversing camera. If the OE number is consistent, it can be directly replaced. Before placing an order, please provide the factory harness camera photo for verification
  • Ford Edge/Lincoln MKX factory rearview camera, OE BT4Z-19G490-A/-B, 2011-2013
  • The same part number covers both Ford and Lincoln models
  • Sensor: 1/4" CMOS active pixel array, Nidec glass + plastic lens
  • Minimum illumination 0.1Lux, effective pixels 728×582, 600 TV lines
  • Viewing angle 170°, standard NTSC / PAL, electronic shutter 1/50~1/100,000 seconds
  • Waterproof to IP68, power supply DC 6~12V
  • The factory harness plug is connected, no wire cutting, the appearance is matches the factory part

Ordering notes

Points to confirm before production so the unit arrives ready to fit.

  • Ask the customer for photos of the factory camera — front, back, plug, bracket and the OE label on the housing — and check them against ours one by one.
  • Check the OE number BT4Z-19G490-A / -B, different suffixes may correspond to different years, confirm word for word
  • Confirm model (Ford Edge or Lincoln MKX) and model year 2011-2013
  • Confirm the camera position — reversing view, or which channel of the 360 system.
  • Confirm quantity, packaging and printing.

Installation & usage

Voltage, wiring, sealing and maintenance guidance for the installer.

  • Disconnect the battery negative terminal before installation and keep the circuit unpowered while working.
  • When removing original parts, protect the clips, seals and plugs — do not force them.
  • After fitting, check the clips are fully seated and the seal is compressed so water cannot seep in.
  • Power up and check the reversing image and the factory guide lines work correctly.
  • When washing, do not hold a pressure washer directly on the camera or connector.
  • Keep the original parts you removed.
OEM Replacement Cameras

Other models in this range

See all 31 products in this range

Need a quotation for the BT4Z-19G490?

Send us the quantity, the vehicle or application, and the destination market. We will confirm the specification and quote within 24 hours.

Email Us for a Quote
Emailinfo@jfacam.com
WhatsApp+86 188 7400 7838
Tel+86-0755-2819 2146