Aftermarket · Vehicle-specific
A1669059302

A1669059302 Mercedes-Benz factory camera (W166 / W176 / X156 / X166 / R172)

Key features

  • [It can be used as soon as the OE is matched] OE: A1669059302 | Model: Mercedes-Benz W166 / W176 / X156 / X166 / R172 (OEM cross-reference list caliber) | Position: rear view / looking around a certain road. The folder in this catalog reads CLA250 / GLA250 / GLE350 / C117, which is different from the OE cross-reference list. Please check by OE before placing an order. Please provide the customer with factory camera photos for verification again
  • Mercedes-Benz factory camera, OE A1669059302
  • Covers W166, W176, X156, X166, R172 and other chassis (according to OE number)
  • Factory plug connection, no wire cutting
  • The appearance is matches the factory part, and the installation position and angle are the same
  • Sealed housing, rainproof, resists mud and pressure washing

Ordering notes

Points to confirm before production so the unit arrives ready to fit.

  • Confirm the model caliber first: the company’s OE cross-reference list says W166 / W176 / X156 / X166 / R172, and the folder in this catalog says CLA250 / GLA250 / GLE350 / C117. The two are inconsistent and must be reviewed
  • Ask the customer for photos of the factory camera — front, back, plug, bracket and the OE label on the housing — and check them against ours one by one.
  • Check that the OE number A1669059302 is completely consistent (the same family member A1669059602 is another part number, which is most likely to be mistaken)
  • Confirm chassis code (W166/W176/X156/X166/R172) and model year
  • Confirm the camera position (rear view/360 certain channel); 360 may need to be calibrated after replacement
  • Confirm quantity, packaging and printing.

Installation & usage

Voltage, wiring, sealing and maintenance guidance for the installer.

  • Disconnect the battery negative terminal before installation and keep the circuit unpowered while working.
  • When removing original parts, protect the clips, seals and plugs — do not force them.
  • After fitting, check the clips are fully seated and the seal is compressed so water cannot seep in.
  • Power on test screen and factory auxiliary functions, perform calibration if necessary
  • When washing, do not hold a pressure washer directly on the camera or connector.
  • Keep the original parts you removed.
OEM Replacement Cameras

Other models in this range

See all 31 products in this range

Need a quotation for the A1669059302?

Send us the quantity, the vehicle or application, and the destination market. We will confirm the specification and quote within 24 hours.

Email Us for a Quote
Emailinfo@jfacam.com
WhatsApp+86 188 7400 7838
Tel+86-0755-2819 2146