Aftermarket · Vehicle-specific
A0009055606

A0009055606 Mercedes-Benz factory 360 panoramic camera

Key features

  • [It can be used when matching OE] OE: A0009055606 | Model: Mercedes-Benz 360 panoramic view (similar to A0009055505 / 6206 / 6306, of which A0009055505 corresponds to A / B / G / GLC / CLA / GLE) | Location: 360 panoramic view on a certain road. If the OE number is consistent, it can be directly replaced. Before placing an order, please provide the factory harness camera photo for verification
  • Mercedes-Benz factory 360-degree panoramic camera, OE A0009055606
  • Part number of the same family: A0009055505 / A0009055606 / A0009056206 / A0009056306, selected according to vehicle model and location
  • Factory plug connection, no wire cutting
  • The appearance is matches the factory part, and the installation position and angle are the same
  • Sealed housing, rainproof, resists mud and pressure washing

Ordering notes

Points to confirm before production so the unit arrives ready to fit.

  • Ask the customer for photos of the factory camera — front, back, plug, bracket and the OE label on the housing — and check them against ours one by one.
  • Check OE number. Four part numbers of the same family correspond to different models/positions. It is most easy to get the wrong part number. Be sure to check it word by word
  • Confirm the model (A / B / G / GLC / CLA / GLE, etc.) and year
  • Confirm which side of the 360 ​​panorama it is (front/back/left/right), the part number is often different in different locations
  • Replacing a 360 camera normally requires calibration with a diagnostic tool — confirm the customer has the equipment.
  • Confirm quantity, packaging and printing.

Installation & usage

Voltage, wiring, sealing and maintenance guidance for the installer.

  • Disconnect the battery negative terminal before installation and keep the circuit unpowered while working.
  • When removing original parts, protect the clips, seals and plugs — do not force them.
  • After fitting, check the clips are fully seated and the seal is compressed so water cannot seep in.
  • Power up, check the 360 image and calibrate, confirming the stitch is aligned.
  • When washing, do not hold a pressure washer directly on the camera or connector.
  • Keep the original parts you removed.
OEM Replacement Cameras

Other models in this range

See all 31 products in this range

Need a quotation for the A0009055606?

Send us the quantity, the vehicle or application, and the destination market. We will confirm the specification and quote within 24 hours.

Email Us for a Quote
Emailinfo@jfacam.com
WhatsApp+86 188 7400 7838
Tel+86-0755-2819 2146