JPC-37 new bracket square head car camera (square head + new generation bracket)

Key features

Square camera with the new-generation mounting bracket
Improved bracket: easier angle setting and more stable under vibration than the old type
Surface mount design - no big hole in the bumper or garnish
Universal for all cars; rear, front or side mounting
Signal options: CVBS 420/480 TV Lines, AHD 720P, AHD 1080P
Sensor options: HD CCD / CMOS; star-light night vision module (GC2053 / GC2083)
PAL or NTSC signal system; mirror image and reversing grid selectable
Waterproof IP69K housing with sealed lens ring
DC 12V standard, 24V optional; circuit protection function
Package: 1 x camera with bracket, 1 x 1 m DC power cable, 1 x 6 m AV cable, screws
Standard tail cable 5 copper + 5 steel; BMW plug and pure-copper cable optional

Points to confirm before production so the unit arrives ready to fit.

Confirm whether the fixing hole position and adjustable range of the new bracket meet the mounting surface of the vehicle model
Confirm case size and color (black/silver/white)
Confirm the signal type: CVBS, AHD 720P or AHD 1080P. An AHD camera must be paired with an AHD host.
Confirm the chipset — CVBS: 1058 / 4089 / 7430 / 7440 / 7080; AHD: 2053 / 528 / 536D / 536 / 4109.
Confirm lens angle. Around 108° horizontal is standard (110° nominal); 135° / 150° / 170° wide-angle versions are optional.
Confirm whether LED illumination and a switch-panel tail cable are required.
Confirm PAL or NTSC, whether parking guide lines are needed, and normal or mirrored image.
Confirm connector and voltage 12V / 24V, plus tail cable construction and length.
Confirm accessories (screws/brackets) and packaging and silk screen requirements

Voltage, wiring, sealing and maintenance guidance for the installer.

Before wiring, confirm the supply — DC 12V, or the 24V version on a 24V vehicle — and never reverse the red and black supply wires.
The fixing surface of the bracket must be flat and clean, and the screws must be tightened and anti-loosened
After adjusting the angle, tighten the bracket screws to prevent the lens from shifting due to driving vibrations
Route the cable clear of hot surfaces and sharp sheet-metal edges, and do not pull the tail cable tight.
Seal the connector properly; bumper positions take a lot of water spray.
Clean the lens with a soft cloth — never alcohol or anything abrasive.
AHD cameras must be paired with an AHD host; CVBS and AHD cannot be mixed.

Car & Aftermarket Cameras