JPC-02 Square Four-Light Car Camera (square housing + 4 LED fill lights)

Key features

Square housing with 4 x LED lamps - a classic universal reversing camera shell
LED illumination greatly improves the picture in dark garages and at night
Universal fitting for all cars; can be mounted at the rear, front or side
Signal options: CVBS 420/480 TV Lines, AHD 720P, AHD 1080P
Sensor options: HD CCD / CMOS; star-light night vision module (GC2053 1/2.9" or GC2083 1/3") with AHD1080P / 720P / CVBS coaxial output
PAL or NTSC signal system; mirror image and reversing grid selectable
Waterproof IP69K housing with sealed lens ring
DC 12V standard, 24V optional; circuit protection function
Adjustable camera angle
Package: 1 x camera, 1 x 1 m DC power cable, 1 x 6 m AV cable, 1 x hole saw
Standard tail cable 5 copper + 5 steel; pure-copper cable and BMW plug optional
Optional: non-heating switch board tail cable, single / dual / triple LED control, fisheye wide angle 140-170 degree
Chip ordering (supplier): CVBS 1058 > 4089 > 7430 > 7440 = 7080 > 1346 > 9527; AHD 2053 > 528 > 536D > 536 > 4109

Points to confirm before production so the unit arrives ready to fit.

Confirm the housing and installation method (square four lights, opening/outside), the hole diameter must match the car model
Confirm the signal type: CVBS, AHD 720P or AHD 1080P. An AHD camera must be paired with an AHD host.
Confirm the chipset — CVBS: 1058 / 4089 / 7430 / 7440 / 7080; AHD: 2053 / 528 / 536D / 536 / 4109.
Confirm lens angle. Around 108° horizontal is standard (110° nominal); 135° / 150° / 170° wide-angle versions are optional.
Confirm the system PAL / NTSC, whether the reverse scale line, front image / mirror image is required
Confirm the connector: RCA, 4-pin aviation or BMW type.
Confirm 12V or 24V.
Confirm the number of LEDs and whether the switch board tail wire is required (the non-heating switch board is optional)
Confirm tail cable construction — 5 copper / 5 steel is standard — and whether pure copper, an extension and a custom length are needed.
Confirm color, accessories (hole opener/screws) and packaging form and silk screen

Voltage, wiring, sealing and maintenance guidance for the installer.

Before wiring, confirm the supply — DC 12V, or the 24V version on a 24V vehicle — and never reverse the red and black supply wires.
Before opening the hole, confirm the hole diameter and sheet metal thickness; for the snap-in type, ensure that the sealing ring is tightly pressed and there is no water leakage
Route the cable clear of hot surfaces and sharp sheet-metal edges, and do not pull the tail cable tight.
The connector (RCA/4-pin) should be waterproof, and the bumper and license plate are easily washed away by water
Tighten the screws once the angle is set, so vibration cannot shift the lens.
Clean the lens and LED panel with a soft cloth, do not wipe with alcohol or hard objects
AHD cameras must be paired with an AHD host; CVBS and AHD cannot be mixed.

Car & Aftermarket Cameras