JPC-25 universal square head car camera (supply model JPC-25 / 110°-170°)

Key features

Supplier model JPC-25; universal type car reversing camera (universal square head)
Colour black; Material plastic
Lens angle 110 / 170 degree options
TV lines 420 / 480 TV Lines, 720P, 1080P
Image sensor HD CCD / CMOS
Signal system PAL or NTSC
Universal for all cars; rear, front or side mounting
Waterproof IP69K with sealed lens ring
DC 12V & 24V (optional); circuit protection function
High definition, parking easier and safer
Scientific design and easy installation
Package: 1 x backup camera, 1 x 1 m DC power cable, 1 x 6 m AV cable, 1 x hole saw
Standard tail cable 5 copper + 5 steel; BMW plug and pure-copper cable optional

Points to confirm before production so the unit arrives ready to fit.

Confirm the lens angle version: 110° or 170° (both specifications are available in this model)
Confirm signal type and resolution: CVBS 420/480TVL, AHD720P, AHD1080P
Confirm the chipset — CVBS: 1058 / 4089 / 7430 / 7440 / 7080; AHD: 2053 / 528 / 536D / 536 / 4109.
Confirm whether LED fill light is needed (please select JPC-26 if necessary)
Confirm PAL or NTSC, whether parking guide lines are needed, and normal or mirrored image.
Confirm the connector: RCA, 4-pin aviation or BMW type.
Confirm voltage 12V / 24V
Confirm tail cable construction — 5 copper / 5 steel is standard — and whether pure copper, an extension and a custom length are needed.
Confirm colour, accessories (hole saw), packaging and printing requirements.

Voltage, wiring, sealing and maintenance guidance for the installer.

Before wiring, confirm the supply — DC 12V, or the 24V version on a 24V vehicle — and never reverse the red and black supply wires.
Before opening the hole, confirm the hole diameter and sheet metal thickness; for the snap-in type, ensure that the sealing ring is tight and does not leak
Route the cable clear of hot surfaces and sharp sheet-metal edges, and do not pull the tail cable tight.
Seal the connector properly; bumper positions take a lot of water spray.
Adjust the angle and lock it to prevent the lens from shifting due to driving vibrations
Clean the lens with a soft cloth — never alcohol or anything abrasive.
AHD cameras must be paired with an AHD host; CVBS and AHD cannot be mixed.

Car & Aftermarket Cameras