Main image and detail shots of the JPC-256Ai-AHD.
Thermal · JPC-256 & JPC-640
JPC-256Ai-AHD
JPC-256Ai-AHD vehicle thermal imaging AI camera (AHD output/720P-1080P optional)
Key features
- Thermal imaging + AI recognition integrated, video output in AHD digital high definition (720P / 1080P optional)
- Directly connect to the existing AHD display or AHD interface MDVR in the car, no additional CVBS screen is required
- AHD digital output is cleaner than CVBS and the picture is more delicate, suitable for customers who have high requirements for picture quality
- AI recognizes pedestrians and vehicles, and the alarm screen and recognition frame are superimposed on the AHD video and output
- 12μm vanadium oxide uncooled infrared detector, resolution 256×192 (optional 384×288 / 640×512)
- Lens 10mm / F1.0, FOV 18°×13°, taking into account both detection distance and image range
- Optional 1.5mm super wide-angle (FOV 120°×86°) version, suitable for mining trucks, forklifts, low-speed special-purpose vehicles, agricultural machinery, and reversing vehicles
- Far-infrared imaging: black barrier, anti-glare, fog/fog/smoke/haze penetration
- Automatic defrost: start when the temperature is lower than 2°C, stop when the temperature is higher than 7°C
- White hot mode, automatic shutter correction, detail enhancement, ≤25Hz
- Aluminum alloy sealed housing, IP67 waterproof; operating temperature -30°C~+70°C
- Detection distance reference: 10mm movement <1000m person / <1280m car; recognition <250m person / <320m car
- Can be used with a car-specific decoder to connect to the factory harness screen without loss
Ordering notes
Points to confirm before production so the unit arrives ready to fit.
- Confirm whether the customer's host computer is AHD or CVBS: Select this model for AHD monitor/AHD MDVR; select JPC-256Ai for CVBS screen only
- Confirm the AHD output resolution: 720P or 1080P (must be consistent with the resolution supported by the host, incorrect connection will result in no picture or blurry screen)
- Confirm the carrier form of the AI alarm (built-in camera or attached controller), and who outputs the alarm sound (host speaker/external speaker)
- Confirm resolution: 256 × 192 standard; 384 × 288 and 640 × 512 are upgrade options.
- Confirm the lens and field of view: 10mm (18°×13°) standard or 1.5mm ultra-wide angle (120°×86°)
- Confirm whether AHD and CVBS need to be output at the same time
- Confirm the connector type (4-pin aviation connector/RCA) and cable length
- Confirm the power supply mode DC12V and whether a voltage stabilizing harness is required
- Confirm whether it needs to be connected to the factory harness screen (if necessary, a dedicated car decoder will be provided according to the model)
- Confirm quantity, packaging and printing requirements in advance.
Installation & usage
Voltage, wiring, sealing and maintenance guidance for the installer.
- The camera must be installed outside the car (at the center grille of the front bumper), and heat radiation cannot penetrate the glass
- The AHD output must match the resolution of the host. If the wrong connection is made, the screen will be black or blurred. Please confirm the video format in the host menu before loading
- The lens carries an anti-reflective coating — clean it only with a proper lens cloth, never touch it with bare fingers and never use alcohol.
- Do not point the camera at the sun, lasers, welding arcs or other intense light sources for long periods.
- The screen will temporarily freeze for about 100~150ms and then recover. This is because the automatic shutter is in action, which is normal
- Thermal contrast falls as ambient temperature rises; this is normal.
- The installation angle is parallel to the ground, and the junction between heaven and earth in the distance is approximately in the middle of the screen
- The camera and cable connectors should be waterproof. The center grid is easily washed away by water in rainy days
- The AI alarm sensitivity must be adjusted according to the vehicle model during the road test after installation. If it is too high, it will cause false alarms, and if it is too low, it will cause false alarms
Thermal Imaging Cameras
Other models in this range
JPC-256-AI-A 5
JPC-256-AI-A 5-inch thermal imaging night vision system (pedestrian + vehicle + animal detection / touch screen)
Three-in-one AI recognition: simultaneous detection of pedestrians, vehicles, and animals (animals can be recognized up to 60m, and …
View details
JPC-256Ai-mirror
JPC-256Ai-mirror special car rearview mirror thermal imaging night vision system (4.3 inches / factory rearview
Rearview mirror-type main unit, installed at the position of the factory harness rearview mirror (special bracket for special vehicl…
View details
JPC-256Ai-7inch 7
JPC-256Ai-7inch 7-inch thermal imaging AI all-in-one machine (display built-in algorithm / 1024×600 IPS)
7-inch all-in-one machine: The display host has a built-in AI algorithm module. The camera + a screen is a complete system, and the …
View details
JPC-256Ai-ALL
JPC-256Ai-ALL smart AI thermal imaging camera (camera built-in algorithm / no host / AHD + RS485)
The camera has a built-in AI algorithm and does not have an independent host: it can work just by connecting it to an AHD monitor, m…
View details
JPC-256
JPC-256 vehicle thermal imaging camera (256×192 / without algorithm / AHD output)
Single thermal imaging camera without AI algorithm: the lowest cost, "only visible, no alarm" entry-level solution
View details
JPC-256Ai
JPC-256Ai Universal Thermal Imaging AI Night Vision System (CVBS + USB Dual Output/With Controller)
Universal DIY modification solution: thermal imaging camera + independent controller (ECU), the algorithm is in the controller, and …
View detailsNeed a quotation for the JPC-256Ai-AHD?
Send us the quantity, the vehicle or application, and the destination market. We will confirm the specification and quote within 24 hours.